Good luck with your favorite purchases
Animal ID Reader 134.2KHz ISO11784 85 FDX B EMID Handheld Pet Tag Chip Scanner USB Charging Built in Buzzer
Feature:
1. Working Range: This portable animal ID reader supports ISO11784 85 FDX‑B ID64 microchip, with a working frequency of 134.2KHz, a reading distance of 15cm.
2. Save and Display: Up to 128 labels can be saved, the information can be uploaded to the computer via USB cable, and the organic LED display screen is clear and intuitive.
3. Battery Powered: This animal chip scanner has built in 3.7V rechargeable lithium battery, with 800mAh large capacity, USB 2.0 interface, can be fully charged in 90 minutes.
4. Applicable Fields: This scanner is widely used in small animal management, resource management, railway inspection, husbandry, tree management, animal hospital, etc.
5. Convenient Use: The animal ID reader has side non slip function, supports single hand holding, has the advantages of simple operation, sensitive response and strong practicability. Specification:
Item Type: Animal Scanner
Material: ABS
Working Frequency: 134.2KHz
Data Storage: Stores 128 sets of data
Charging Method: USB
Screen Display: Organic LED Display
Continuous Working Time: 4 Hours
Reading Standard: ISO11784 85 FDX B and EMID
Buzzer: Built in
Operating Language: English
Power Supply: 3.7V Rechargeable Lithium Battery 800mAh (built in battery), fully charged in 90 minutes
Reading Distance: Approx. 15cm / 5.9in How to Use:
1. Power on and Card Reading:
Press the button to power on and enter the scanning tag interface.
2. Scanning Tag:
Scanning FDX‑B and EMID tag within the sensing area. If no tag is found, it will prompt No Tag Found.
3. Charging and Data Upload:
After connecting the USB cable, the USB symbol will appear in the upper left corner of the LCD screen, indicating the charging status. Press and hold the button for 3 seconds to upload the data stored in the device, up to 128 sets of data. After successful data upload, the interface will display as follows. Alternatively, you can connect the USB cable to upload real time data scanned by the device.
4. Auto Power Off:
The device will automatically power off after 120 seconds of inactivity. Package List:
1 x Animal Scanner
1 x Data Cable
