Feature:
1. Full numerically controlled dual‑channel DDS function arbitrary wavesform generator with high accuracy.
2. Use DDS direct synthesis technology to produce accurate and low‑distortion output signals.
3. Surface mount technology, large‑scale integrated circuit, high reliability and long service life.
4. Dual channel design of equal performance, phase difference 360 degree continuously adjustable.
5. High‑quality flame‑retardant shell, makes it easier to operate and view data after mounting the bracket.
6. At the same time, it has output short‑circuit protection capability. All signal output terminals can work for 60S under load short‑circuit conditions.
7. Can use sine waves, square waves, sawtooth waves, or arbitrary waves to generate pulse train, the number of pulse period is continuously adjustable between 0‑1048575.
8. Independent operation interface, clear functions, convenient control, suitable for electronic enthusiasts, scientific research institutions and high tech enterprises.
9. Integrates functions of function signal generator, arbitrary wavesform generator, pulse signal generator, noise generator, signal measurement, counter and frequency sweep.
Specification:
Condition: 100percent Brand New
Item Type: Signal Generator
Material: Silicone, ABS (Flame Retardant)
Model: JDS6600 30M
Frequency Characteristics:
Sine Waves Frequency Range: 0 30MHz
Square Waves Frequency Range: 0 25MHz
Triangular Waves Frequency Range: 0 25MHz
Pulse Waves Frequency Range: 0 6MHz
TTL Digital Waves Frequency Range: 0 6MHz
Arbitrary Waves Frequency Range: 0 6MHz
Pulse Width Adjustment Range: 50nS 4000S
Square Waves Rise Time: less than 15ns
Minimum Frequency Resolution: 0.01One millionth Hz (0.00000001)
Frequency Accuracy: + 20ppm
Frequency Stability: + 1ppm 3 Hours
Waves Characteristics:
Waveform Types: Sine waves, square waves, pulse waves (adjustable duty cycle, pulse width and cycle time can be accurately adjusted), triangular waves, partial sine waves, CMOS waves, DC level (set the DC amplitude by adjusting the offset), half waves, full waves, positive staircase waves, reverse staircase waves, noise waves, exponential rise, exponential fall, multi sonic waves, Sinker pulse, Lorentz pulse, and 60 user defined waveforms
Waves Length: 2048points
Waveform Sampling Rate: 266MSa S
Waveform Vertical Resolution: 14 Bits
Sine Waves: Harmonic Suppression: 245dBc (<1 MHz); 240dBc (1 MHz 20MHz)
Total Harmonic Distortion: <0.8percent (20Hz 20kHz, 0dBm)
Square Waves and Pulse Waves: Overshoot less than 5percent
Pulse Waves Duty Cycle Adjustment Range: 0.1percent 99.9percent
Partial Sine Waves Duty Cycle Adjustment Range: 0.1percent 99.9percent
Sawtooth Waves Linearity: more than 98percent (0.01Hz 10kHz)
Output Characteristics:
Sine Waves Amplitude Range: Frequency less than 10MHz, 2mVpp 20Vpp
Square Waves Triangular Waves Amplitude Range: Frequency less than 10MHz, 2mVpp 20Vpp
Amplitude Resolution: 1mV
Amplitude Stability: + 0.5percent 5 Hours
Amplitude Flatness: + 5percent (<10MHz); + 10percent (>10MHz)
Waves Output:
Output Impedance: 50 Ohm + 10percent (Typical)
Protection: All signal output terminals can work within 60 under load short circuit conditions
DC Offset:
Offset Adjustment Range: Offset less than 10 Amplitude 2
Offset Resolution: 0.01 V
Phase Characteristics:
Phase Adjustment Range: 0 359.9 degrees
Phase Resolution: 0.1 degrees
TTL CMOS Output: Low Level: <0.3V
High Level: 1V 10V
Level Rise Fall Time: <20ns
External Measurement Function:
Frequency Counter Function: Frequency Measurement Range: 1Hz 100MHz
Measurement Accuracy: Continuous Adjustment of Gate Time 0.01S 10s
Counter Function: Counting Range 0 4294967295
Coupling Mode: DC and AC Coupling Modes
Counting Method: Manual
Pulse Width Measurement: 0.01us Resolution, Maximum Measurable 20s
Period Measurement: 0.01us Resolution, Maximum Measurable 20s
Sweep Function:
Sweep Channel: CH1 or CH2
Frequency Sweep Type: Linear Sweep, Logarithmic Sweep
Sweep Time: 0.1s 999.9s
Setting Range: Arbitrarily set between the starting point (0.01Hz) and the maximum output frequency of the corresponding model at the end point
Sweep Direction: Forward, reverse and round trip
Burst Function:
Number of Pulses: 1 1048575
Burst Mode: Manual trigger, CH2 trigger, external trigger (AC), external trigger (DC)
General Technical Specifications:
Display Type: 2.4in TFT Color LCD Display
Storage and Loading: Quantity: 100 Groups
Location: 00 99 (the default storage location parameter of 00 is called when the machine is turned on)
Arbitrary Waveform: Quantity: 60 groups from 1 to 60 (the default is 15 groups at startup)
Interface: Interface Mode: USB to serial interface
Expansion Interface: Serial port with TTL level mode, convenient for users to develop
Communication Rate: Using standard 115200bps
Communication Protocol: Using commands line mode, the protocol is open
Output: DC5V+ 0.5V
Environmental Conditions: Temperature: 0 40 celsius ; Humidity: <80percent
.
Package List:
1 x Signal Generator1 x Power Adapter1 x USB Cable2 x Signal Connection Cable1 x English Manual1 x CD1 x BNC Cable
