Zausovshchik 45 for Tiles

The edger is an attachment for a grinder for cutting tiles at 45 degrees. For beautiful facing of external right corners, the end of the ceramic tile is cut at 45 degrees with a grinder to form a neat 90-degree angle. Grinding of tiles is usually done with a grinder using special attachments for an angle grinder: an angle grinder attachment under 45, a tile embedder, an angle grinder attachment, a grinding attachment, an angle grinder slider 45 or a device for washing down tiles. The tool for cutting tiles 45 can have different fastenings; they can be attached to the places where the handle is installed, to the protective casing, or to be grabbed by the body of the angle grinder. A diamond disc for ceramics and porcelain stoneware is used as a cutting tool. For more convenient work, special diamond wheels with an enlarged working part are used. These machines for cutting tiles allow you to process the edges of the tiles on site, there is no need to transport the slabs to a hydrocutting machine. Cutting down tiles at 45 degrees is not a simple process that must be undertaken with all safety measures in mind. The cutting jig is suitable for 115 and 125 mm angle grinders. The 45 degree burr can leave local unevenness; to obtain an ideal edge, it is recommended to additionally use diamond flexible grinding wheels AGShK (turtle) grain 30, 50, 100 (depending on the hardness of the material), as a rule, wheels with a diameter of 100 mm are used, attached to support cups with Velcro . The time when decorative corners were used to close the outer corner has already passed; now they use open outer corners with a cut of the tile edge and a joint between the tiles. To fix the position of the tiles, reusable and disposable tiles are used, which maintain flatness and prevent shrinkage and shifting.