Audio Design Speaker Selector HAS-3S

------------------------------------------------------------------------------------------------------------------ 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ------------------------------------------------------------------------------------------------------------------ For switching between 3 pairs of speakers or 3 power amplifiers Speaker terminal: Stranded wire, Y lug (width 8mm or more), banana plug can be connected. Input/output: 3 inputs/1 output or 1 input/3 outputs Internal resistance (between terminals) is extremely small at 6mΩ Size (WxHxD)/Weight: 21x9x18cm/1.6Kg ◇The spacing between the speaker terminals (center to center) is 22 mm horizontally and 35 mm vertically, so you can rest assured that there will be no damage to the power amplifier due to short circuits between the terminals. ◇Achieves an extremely low resistance of 6mΩ measured between terminals, so there is no need to worry about sound quality deterioration or DF deterioration. ◇Can be used with all amplifiers from vacuum tubes to transistors. ◇This is a BTL amplifier compatible model that can switch both positive and negative signals. ◇The speaker terminal hole diameter is 6mmΦ, so you can connect extra-thick speaker cables, and you can also use bare speaker cables and banana plugs (simultaneous connection).