Features:
- Charge current.
- For batteries used on battery management systems only.
- For loading 12V or 24V LiFePO4 batteries.
For the activation or maintenance of a weakness, there's a battery scan.
is used to select a state for loading 12V or 24V per battery,
- Could not be a severe battery injury. Not for LiFePO4 battery lithium.
- For normal acid lead.
Including AGM, GEL, SLA, wet, deep recycling, EFB, Syden, etc.
Warn
1. Do not pay a battery without a BMS battery.
2. charge the battery below 20AH with the minimum current.
3.Check a detailed battery before use.
4.provide air to prevent flames and sparks.
5.Don't expose a load to the sun, or under a high temperature environment.
6.A battery of acid is food. Wash immediately with water if oxygen comes into contact with skin or eyes.
7.No freezing or battery failure.
8.Nine, no height, no battery charge.
9.You don't place a battery at the time of loading.
10.Be especially careful to reduce the risk of dropping metal on a battery. It might blow or short in a battery circle or some other power part that could cause an explosion.
11.When working with battery acid ash, remove personal metalitems like rings, brackets, chains, clock...
12.No smoking or blowing or flaming during loading.
13.In order to reduce the risk of electrical shock, switch off AC charge to sink before doing any maintenance or cleaning.
Details:
AC tape: 100-240 V 50/60Hz
Strength plate: 12 V / 24 V
Current load: Max 10A * 2(12V), Max 5A * 2(24V)
substitution for: lithium/LiFePO4/acid powder (AGM,GEL,EFB, MF, flooded, VRLA, on the wet side of batteries ..)
Hign-concerned Chemical : None
Data Transmission : No
Output Interface : USB Output
Package : Yes
Use : Standard Battery
Model Number : P10X2 car charger
Display screen : Yes
Intelligent Charge : Yes
Quick charge : Yes
Type : Electric
Size : about 14.5*9.7*6cm
Applicable battery type : Lithium, LiFePO4, Lead-acid (AGM, GEL, EFB,MF, FLOODED, VRLA, SLA, WET, etc.)
Applicable battery voltage : 12V,24V
Charging Current : Max 10A*2(12V),Max 5A*2(24V)
Minimum Start Volt : 2V
Feature : 12V car battery charger
Feature 1 : 10A car charger
Feature 2 : Lead Acid battery charger
Feature 3 : LiFePO4 charger
Feature 4 : charger for car
Feature 5 : 9-stage car charger
What to get:
1X P10X2 Charging battery vehicle
1x3M Electric Wire Length
2x Clip algorithm (approx. 88cm)
1x Handy
1x retailer box
No-delivery refund
