Aideepen Transistor Tester Multimeter with Colorful TFT Backlight for and Automatic Detection and Shutdown LCR-TC1 1.8-inch Display, Multi-Function

---------------------------------------------------------------------- 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ---------------------------------------------------------------------- Product Parameters: Built-in lithium-ion battery with color display, size 89*69*25mm. Red and green charging indicators. Charging is via an external 5V power supply or mobile phone USB power supply. (Note: When testing a capacitor, please fully discharge the capacitor before use.) 【Multifunctional Use】Widely used for detecting NPN and PNP transistors, capacitors, resistors, diodes, triodes, voltage, N-channel and P-channel MOSFETs, IGBTs, JFETs, Triacs, batteries, etc. It can also detect Zener diodes from 0.01 to 30V. One-Key Operation: Place the component pin in the corresponding area and turn the small handle, the detector will automatically test and finally display the results clearly on the backlit TFT screen (160x128). One-button operation, automatically detect and shut down, you can also press the multi-function button to close the detector. [Infrared Decoding & Receive Command] After detection, align the infrared remote control with the "IR" lamp and press the button on the remote control. If the detector decodes successfully, the data code and infrared waveform will be displayed. The detector will display the results in color. Auto power-off (timeout can be set). [Supports Hitachi IR Codes] The test sheet is divided into a transistor test area and a Zener diode test area, with KAA being the Zener diode test area. Simply short-circuit the three test sockets and briefly press the multi-function button to perform automatic calibration. If you need a Japanese manual, please feel free to contact us. Or, you can download the PDF manual file at the link. Grade: Display screen: 1.8 inch TFT screen, colored display ZenerDior: Crystal amount: 0.01-4.5V Zenerdio metering voltage: 0.01-30V Review version: IGT