ALTEED LED Warning for 12V and 24V Diffused 21 Light Patterns Light, Yellow, Vehicles, 180-Degree Light,

Number of items: 1 Compatible voltage: DC10-30V Waterproof/dustproof: IP67 Operation patterns: 21 patterns including flashing, alternating left and right, and constant lighting □Wide diffusion lens emits light in 180 degrees □ 21 patterns of action, including flash (slow/fast, etc.), alternating left and right, and constant full lighting □It has a memory function, so it will restart from the lighting pattern when the power is turned off. □ Up to 12 lights can be lit in tandem. Compatible with 10-30V voltage, so it can be used in both 12V and 24V vehicles. □ IP67 standard, waterproof and dustproof design □ International standard ECE R10 certification Quantity: 1 Operation patterns: 21 patterns including flashing, alternating left and right, and constant lighting Compatible voltage: DC10-30V Current consumption: 12V=0.2A-1.0A /24V=0.1A-0.5A Size: 90mm x 35mm x 35mm (light unit) *The bracket cannot be removed from the main unit. Mass: Approx. 200g Material: PC, stainless steel (stay part) Waterproof standard: IP67 Operating environment: -30℃ to +60℃ Brightness: [Fully lit] 180 [Flashing] 540 [How to use] Connect the red wire to the + side and the black wire to the - side. Touching the yellow wire to the - side for about 1 second will change the lighting pattern. Repeat the touch to get the pattern you want. Once you set the pattern, the memory function will keep the pattern you set from the next time onwards. By connecting the yellow wires of each light, up to 12 lights can be lit in tandem. *After setting the pattern, insulate the yellow wire to prevent current from flowing to the + and - sides. *Do not touch the yellow wire for more than 3 seconds. [Notes] If the yellow wire touches the black wire for more than 10 seconds, the lighting mode will change and the light will no longer function properly. In this case, connect the yellow and black wires together for 21-24 seconds (measure this accurately with a stopwatch, etc.), then disconnect both wires and turn off the power. After restarting, touch the yellow wire to the black wire for 1 second to reset and return to normal.