Our store offers a curated selection of genuine Japanese products. You can shop with complete peace of mind knowing that all our items are authentic. Please note that the instructions and manual for this product may only be available in Japanese.
1. KEY FEATURES:
- The middle class Wheeler Propo has evolved significantly!
- Receiver set for electric cars T6PV, R404SBS-E
- Power supply: Uses 4 AA batteries (not included).
2. PRODUCT DESCRIPTION:
The middle-class wheeler radio has evolved significantly! [Receiver set for electric cars] T6PV.R404SBS-E.[Full color display + function icons] Equipped with Futaba's fastest system F-4G + UR mode.Full color display.Easy-to-read color function icons.Up to 6 channels can be used.Equipped with 6 systems: F-4G, T-FHSS, S-FHSS, MINI-Z EVO, MINI-Z EVO2, MINI-Z FHSS."Model type" of normal big drift."Winch mixing" for crawlers and "drag racing" which is popular in the U.S.A.It is packed with features such as "Feel" which allows you to adjust the steering sensation from mild to aggressive.[Function/Specifications] [Setup Menu] Receiver settings (F-4G/T-FHSS/S-FHSS and MINI-Z compatible).MINI-Z is also compatible with MINI-Z EVO, MINI-Z EVO2, and MINI-Z FHSS (*Note 1).Telemetry function can only be used in F-4G and T-FHSS modes.Cannot be used in S-FHSS and MINI-Z modes.*Note 1 MINI-Z FHSS requires MINI-Z FS-RM005 module (manufactured by Kyosho Corporation).Servo view: You can check the servo operation of all channels.You can check the operation when adjusting the rudder angle or setting the mixing function.Throttle mode: You can set the neutral brake, which applies the brake at the neutral position of the throttle trigger.Reverse: A function that determines the direction in which servos and other equipment operate relative to transmitter steering, throttle, channel 3/4, and other reserve channel operations.Subtrim: When assembling a model, this is a linkage that connects each servo's servo horn and parts with a rod, and is used to finely adjust the center position of the servo horn as a reference.Endpoint: This is a function used to adjust the left and right steering angles, adjust the high/brake side movement of the throttle, and adjust the up/down side movement of channels 3/4 and other reserve channels during linkage.Fail-safe function: This is a function to set the servo operating position in case the receiver cannot receive the transmitter signal for some reason or the receiver battery voltage drops.Failsafe, Hold, and OFF modes will automatically cancel when the transmitter can again receive a signal.Acceleration: The rise characteristics near neutral on the forward side of the throttle and on the brake side can be adjusted separately.Trim/dial settings: You can set the digital trim (DT1 to DT6) and the functions that can be operated with the dial (DL1).Switch settings: Select the function to operate the push switches (SW1 to SW3) and set the operation method.Idle up: Used to improve engine startability by raising the idling when starting the engine of an engine car (boat).This function is also effective when you want to prevent braking when the power is turned off while driving due to the gear ratio setting or the motor used in the electric car.However, if you are using a MC971CR, MC970CR, MC960CR, MC950CR, MC851C, MC602C, MC402CR, etc., please turn on the idle up function switch after the ESC recognizes the neutral position and becomes operational, just like the neutral brake function.D/R, ATL.Channel setting: A function to assign steering or throttle to any channel.This is a useful function when you want to use steering or throttle on another channel, or when you want another channel to perform the same operation as steering or throttle.[Model menu] Model selection, model copy.model name.Delete model (in SD card).Data reset.Model type: 1/5 model and initial settings suitable for drifting can be used.[Mixing menu] Steering mixing.brake mixing.Gyro mixing.4WS mixing.Dual ESC.CPS Mixing (1, 2, 3): When using CPS-1 (optional), it is possible to set the LED lighting pattern, etc.Tank mixing: Mixing for tracked vehicles such as tanks.Program mixing (1, 2, 3, 4, 5): It is also possible to set the mixing master to telemetry.Winch mixing: This is effective mixing for crawlers.[Racing Menu] Curve (EXP): Steering, throttle, and brake can be set individually.Speed: Steering and throttle can be set individually.Traction control: By intermittent operation of the throttle, you can maneuver smoothly and drive on the ideal line.Additionally, in a drift car, by intermittent operation of the motor in the high point direction, a pseudo rev limiter sound can be reproduced.A.B.S: If you apply the brakes while cornering in a full-time 4WD vehicle, the vehicle will understeer, but by using this function, you can clear the corner smoothly.Starting: Simply operate the throttle trigger slowly without losing grip, and the trigger position will automatically switch to the preset point, allowing for a smooth start.Engine cut: A function that moves the throttle servo to a preset position (engine cut position) so that the engine stops with a switch.Feeling: If you feel that the servo response is too sensitive and difficult to operate, this is a function to make the response milder.Setting it to the mild side will slow down the response, while setting it to the aggressive side will speed up the response.Feeling adjustment OFF is the fastest response state.Drag racing (trans brake): By stopping the vehicle with the throttle (trigger) fully open and releasing the trans brake, sharp acceleration is possible.[Accessories Menu] Timer: Select and use one of the four types of timers: up timer, fuel down timer, lap timer, and lap navigation timer.Lap list: Call this when checking the lap memory data (each lap time) stored by operating the lap timer.S.BUS servo: This is a dedicated function that allows you to change the parameters of the Futaba S.BUS / S.BUS2 servo.Change UR servo settings.MC (ESC) link: You can configure ESC settings.Gyro link: Gyro settings can be made.Index table: You can display the index table for DD cars.Gear ratio table: The final reduction ratio can be calculated from the input secondary reduction ratios of pinion gear, spur gear, and gearbox and displayed in a list.END/DIR button settings: You can customize the END/DIR button to call up your favorite menu.Home screen display settings: You can customize the home screen display.Custom menu editing: You can create your own frequently used functions.Warning display: Low battery alarm, forgotten power off warning, MIX warning.[System Menu] Display settings: You can set backlight brightness, dimming time, etc.System information: You can set the user name, display language, and select the unit of telemetry information using the jog keys.Also displays the software version.Buzzer: Adjust the pitch of switch/trim/jog key operation sound and warning alarm sound.Battery settings: By setting the battery type, you can set the appropriate battery alarm voltage.Total timer: You can display the cumulative time the power is on on the home screen.LED settings: You can set the pilot LED light brightness and lighting method (always on, off, backlight interlocking).Adjuster: Can correct the neutral position and operating angle of the steering wheel and throttle trigger.Receiver update: Can be updated via radio.[Accessories] Wheel position change adapter APA-M x 1.Mounting screw bag x 1 pc.Wheel adapter 32° x 1 piece.Brake lever L x 1 pieceAngle spacer 5° x 1 piece.Large diameter steering wheel x 1 piece.UR/SR label.Instruction manual x 1 copy.hex wrench.Power supply: Uses 4 AA batteries (not included).*Batteries are required to operate this product, but batteries are not included in this product.*This product does not include fuel, batteries, chargers, paint, adhesives, oil, grease, tools, etc.
3. PRODUCT DIMENSIONS & WEIGHT:
- Weight: 1.1 kg
- Dimensions: 26.6 x 25.8 x 14.9 cm
4. SPECIFICATIONS:
