Dear Sir or Madam, good morning!Colored epoxy resin E7040MG 3kg + HARDENER 500gEpoxy resin ratio (ingredient A) of hardener (component B) 6:1 wagowoATTENTION: The colors shown here are for illustrative purposes only and may differ slightly from reality. The appearance depends e.g.. from the monitor settings.E7040MG - Here is a completely new formula in terms of flexibility and durability of epoxy resin. In our recipe for this new resin, modifications were made based on the addition of secondary alcohols, resulting in increased strength and flexibility.
Colored epoxy resin for use as a fine-layer coating or for painting on concrete surfaces to create a wear-resistant, chemical-resistant, and attractive finish. Cured coatings have very good mechanical resistance. (hardness, flexibility, abrasion resistance, impact strength) and chemical (see product technical sheet).The set comes with a hardener. Features:Extremely wear-resistant, applied to concrete, chemically resistant coating. Not afraid of butter, gasoline, and heavy loading equipment. Advantages of colored epoxy resin as paint:-High wear resistance;-Beautiful appearance;-Chemical-resistant;Can be used on:industrial floor, pharmaceutical floor, medical and food premises, cold storage rooms, floors with high traffic and utility load for public use, petrol stations, car washes, warehouses, workshops (including flooring for logistics centers).Color: grey, other colors see below.Drying time: 24 hours (one day) o thickness up to 1 mm at temperatures above 25°C. Surface preparation and application: Apply to a previously clean, dry floor. Prepare the paint for application by thoroughly mixing the components with a whisk on a drill in the proportions indicated on the packaging. The pot life of the mixed resin is preferably no more than 25 minutes.. Apply the material with a roller or squeegee in an even layer. It is possible to apply 1 thin layer, 2 thin layers with intermediate drying within 24 hours, or 1 thick layer up to a thickness of 1 mm.
PROPERTIES: Possibility of obtaining smooth decorative surfaces High surface aesthetics Mechanical resistance Chemical resistance Waterproofness Ease of cleaning
Hardening:Curing at room temperature should be carried out for 7 days to achieve full mechanical strength and for 14 days to achieve chemical resistance.. During application, prepare small portions of the composition that will be used within a few minutes. The optimal working conditions are 20°C and relative air humidity up to 65%.. It is not recommended to lay floors at temperatures below 15°C. At higher humidity, clouding, cratering, and tackiness may occur on the cured coating.. A particularly critical impact on the appearance and quality of the coating is caused by lowering the substrate temperature below the dew point temperature during curing.. In the case of applying multi-layer coatings, the next layer must not be applied if the substrate temperature is lower than or equal to the dew point temperature.
On other auctions, silicone molds for products made from this resin are available: KunstSil-30, Pinselsil-35
No-delivery refund
