IsolBau Fire Protection Foam B1 Construction Foam Assembly Foam Gun Foam
20 x 750 ml
IsolBau Fire Protection Foam B1 is a one-component, non-flammable, moisture-curing assembly foam for professional installation, filling, and sealing in areas requiring fire protection, as well as for other general construction applications.
It is fire-resistant and has the fire resistance class B1.. Adheres very well to all surfaces. Is ideally suited for filling joints and connections in rooms with high fire resistance requirements.
Excellent sealing against smoke and gases. Isolbau Fire Protection Foam can be used for filling joints and connections between solid mineral and metallic building materials as well as for insulating and installing various elements (electrical installations, fire doors, windows, gates, etc.) be used.
Isolbau Fire Protection Foam Gun Foam is sprayed using a standard assembly gun.. This allows for very high dimensional stability with excellent yield and foam structure.
What sets us apart from the competition?
• Fire resistance class B1
• Excellent sealing against smoke and gases
• Non-flammable
• Resistant to high temperatures
• High yield: up to 45 liters
• Quality tested by MPA Hannover (P-NDS04-1369)
• Very high thermal insulation λ 0.036 W/(m K)
• Excellent adhesion on all substrates
• For use in indoor and outdoor areas
• Very high dimensional stability, i.e., no volume loss and no after-stretching once curing is complete
• Quickly cuttable
• Can be plastered and painted over
• High filling capacity
• very good adhesive properties
• Easy processing with foam gun
• Resistant to a variety of solvents, paints, chemicals, oil, and gasoline
• Age and rot resistant
• Resistant to municipal wastewater
• Free recycling of PU foam cans
• Free of Freon (harmless to the ozone layer and greenhouse effect)
Single-component fire protection foam IsolBau is intended for mounting and bonding, sealing in roof and wall areas, insulating and isolating, filling structural components and cavities with fire-resistant requirements.
Suitable for sealing and installing window and PVC door frames, wood, aluminum, insulating roof, wall, and ceiling connections, foaming and insulating pipe penetrations, thermal insulation of central heating and water/sanitary system components, foaming and insulating partition walls, car bodies, boats.
Ideal for sealing against smoke and gases, thermal insulation, and acoustic insulation. The product exhibits very good adhesive properties on a predominant number of building materials, such as e.g. PVC profiles, wood and wood-based materials, bricks, concrete, gypsum, and metal.
Fuel class (DIN 4102) | B1
Recommended processing temperature (Subsurface temperature) | from 10°C to + 30°C
Temperature resistance (after curing) | from -40°C to +90°C
Recommended can temperature | +20°C
Color | Pink
Skin formation time | 5-10 min. (20°C / RH 90%)
Curing time | 24 hrs
Dimensional stability (EN 17333-2:2020) [%] | ≤ 3
Thermal conductivity (RB024) [W/mK] | 0.036
Yield of the foam from one package 750 ml | 45 dm³ (depending on the can and ambient temperature, the humidity, the quality and technical condition of the equipment used – gun, the skills of the fitter)
Packaging | 750 ml
Shelf life | 12 months after date of manufacture
Solubility of the preparation | in organic solvents Acetone, before curing PU foam cleaner
Read the safety data sheet before use. Bring the can to room temperature before use (immerse the cold can in 30°C warm water). Clean and degrease the substrate thoroughly. Moisten the work surface with water.
Shake the can vigorously for about 10-20 seconds. Screw the foam gun onto the can. In the working position during assembly, the bottom of the can is at the top. Apply the foam into the gap from bottom to top.
Fill the column up to 60% of the depth, but not more than 4 cm per layer. Before applying the next coat, spray the previous one with water. Cut off excess foam after curing.
After curing, the foam must be protected against UV radiation, e.g.. B.. with silicone, plaster or paint. Danger! After work and during breaks longer than 5 minutes, clean the foam gun with PU foam cleaner.
Store at +5°C to +30°C in a dry and well-ventilated place in an upright position. Expiration date / Batch number on the bottom of the can.
Health Protection Warnings and Recommendations
The legislator has classified used PU foam cans as hazardous waste and mandated their material recovery.. Therefore, the PU foam cans do not belong in the residual waste, yellow bin, mixed construction waste, or tin can container.. But where to put the cans?
Die PDR Recycling GmbH + Co KG , www.pdr.de collects PU foam cans free of charge throughout Germany for more than 6 boxes, each containing 12 cans. For fewer PU foam cans, you can find your nearest collection point at www.pdr.de/pu-schaumdosen-recycling
From the 24th. August 2023 requires appropriate training before industrial or professional / commercial application.
Contains: Diphenylmethanediisocyanate, Isomers and Homologues, Alkanes, C14-17-, Chloro-, Tris(2-chloro-1-methylethyl) phosphat
Hazard warnings (H-Statements): H222 Extremely flammable aerosol. H229 Container is under pressure: can burst when heated. H332 Harmful if inhaled. H315 Causes skin irritation. H319 Causes serious eye irritation.
H317 May cause an allergic skin reaction. H351 Can probably cause cancer. H335 May irritate the respiratory tract. H373 May damage organs through prolonged or repeated exposure.
safety instructions (P-Statements): P102 Keep out of reach of children. Do not inhale P260 gas. P271 Use only outdoors or in well-ventilated areas. Wear P280 Protective gloves/ Protective clothing/ Eye protection/ Face protection/ Hearing protection.
P302+P352 IN CONTACT WITH SKIN: Wash with plenty of water. P304+P340 IF INHALED: Take the person out into the fresh air and ensure unimpeded breathing. P305+P351+P338 IN CASE OF CONTACT WITH EYES: Rinse carefully with water for a few minutes.
If you are wearing contact lenses, please remove them if possible.. Rinse further. P308+P313 IF exposed or concerned: Seek medical advice/call for medical assistance. P501 Disposal of the contents / the container in accordance with local / regional / national / international regulations.
EUH204 Contains isocyanates. May cause allergic reactions.
Additional information: Container is under pressure: Can burst when heated. Do not puncture or incinerate, even after use. Protect from sun exposure and do not expose to temperatures above 50 °C.
Do not spray near open flame or other ignition sources. Keep away from heat, hot surfaces, sparks, open flames, and other types of ignition sources. No smoking. For individuals already sensitized to diisocyanates, handling this product can trigger allergic reactions.
In case of asthma, eczematous skin diseases or skin problems, avoid contact, including skin contact, with the Product. Do not use the product in poorly ventilated areas or wear a protective mask with an appropriate gas filter (Type A1 according to EN 14387) wear.
From the 24th. August 2023 appropriate training must be provided before industrial or commercial use. More information: www.feica.eu/PUinfo
UFI: KND5-T0PT-200N-XMKN
No-delivery refund
![Fly Killer, Fly Catcher, Adhesive Fly Killer, Indoor Fly Killer, Fly Killer Paper, Fly Catcher Ribbon, Catcher Roll[J391]](https://img.joomcdn.net/3c4edd7437ea84c3f882d7298344fd2097b428d1_99_100.jpeg)
