【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
D-type handle specification 40Vmax model, drilling speed exceeding AC machine. Waterproof protection grade IPX6. *Products with IP markings are designed to be less susceptible to dust and water, but this does not guarantee that they will not malfunction. If a battery is installed, the protection class of the main unit will apply.
Overwhelmingly low vibration "AVT" Anti-vibration side grip and anti-vibration handle reduce vibrations transmitted to your hands. Reduces the load during continuous drilling work. Reduced swaying. The acceleration sensor detects swinging when the bit is locked and automatically stops the motor. *Please hold the machine securely during work. This function will not work if the specified acceleration is not achieved when the device is swung around.
Wireless interlocking dust collection. The dust collector starts when the rechargeable tool is switched on (dust collector, wireless unit, and dust collection attachment sold separately). Interlocking dust collection keeps the work environment clean. 3 modes available for chiseling. Depending on the work, you can switch between "rotation", "rotation + impact", and "impact" using the lever.
DC 36V (40Vmax), sliding Li-ion battery specification. Battery and charger sold separately. Drilling capacity: concrete 28mm/ironwork 13mm/woodwork 32mm/core bit 54mm/diamond core bit 65mm. Number of rotations: 0 to 980 [rotations/min]/Number of blows: 0 to 5,000 [times/min]. 1 charge work amount (estimate) Concrete drilling: 16mm depth 60mm approximately 60 holes (concrete compressive strength 40MPa/when BL4040 is installed)
Total length: length 473mm x width 101mm x height 240mm (when side grip, bit, and stopper pole are not installed). Mass: 3.8kg (when BL4040 is installed, when air duct cap is installed, when side grip and stopper pole are not installed)
Visszatérítés kézbesítés elmulasztása esetén
