D.A.D. Stylish License Plate Stay, Black/Pink, HA688-01-02, by DAD Garson

STYLISH NUMBER PLATE STAY Stylish License Plate Stay Black x Pink [HA688] ~ A front face that stands out with its angle ~

● High-quality finish made from ultra-lightweight aluminum (A5052). ● Tilts the license plate forward approximately 5° for a cool front look! ● Creates a stylish dress-up look that blends seamlessly with the front bumper. ● Complies with the new Road Transport Vehicle Act and Ministerial Ordinance (effective April 1, 2016 / fully applicable October 1, 2021).

[Notes] ● This product is designed to be installed using the standard license plate mounting position.

On vehicles with license plates attached using factory bases or stays, it may not be possible to install this product, or installation may be unstable, or there may be a noticeable gap between the plate and the vehicle. ● When using this product, the license plate will be tilted forward approximately 5° and the bottom edge will be lowered approximately 18mm. Please note that if the bottom edge of the license plate comes into contact with the bumper or other surfaces, it may scratch the bumper or cause a contact noise due to vibrations while driving. ●This product is designed for front license plates only. Do not use on rear license plates of light vehicles. ●When using this product, if you install it in a way that impairs the visibility of the license plate when viewed from the front or if it protrudes more than 30 mm from the overall length of the vehicle, you may be subject to enforcement action or your vehicle may fail inspection due to poor maintenance.

We will not be held responsible or compensated for any such incidents. ●The surface of this product may discolor if it comes into contact with hot water of 80°C or above, such as in a steam car wash. Please be aware of this in advance. ●Due to the characteristics of anodized aluminum, the color may vary slightly depending on the production lot. Please be aware of this in advance. ●The color may fade even after a short period of use due to the effects of ultraviolet rays, acid rain, detergents, etc. In addition, the surface color (anodized aluminum and paint) may peel off due to impact, etc. Please be aware of this in advance. ●When installing this product, be sure to install it in the original license plate position. ●To install this product, you will need a Phillips head screwdriver or hex wrench. ●If you lose the original license plate mounting bolts or the bolts included with this product, you can use commercially available bolts (size: M6-10mm). Color: Black x Pink Material: Ultra-lightweight aluminum (A5052) High-quality finish made from ultra-lightweight aluminum (A5052). Tilt the license plate forward approximately 5 degrees to create a cool front face! Achieve a stylish dress-up look that blends in with the front bumper. Universal license plate bracket, front number plate, tilted license plate bracket, angle bracket, cool, dress-up, custom, sporty, matte, stylish, cool, high-quality, lightweight aluminum, new standard compliant, new standard compliant model