EFFICIENT HTING: hting technology is adopted, with high efficiency, will ht up in 3 seconds after powering on.
BATTERY TIME: This hand warmer has a large battery capacity of 10000mAh, can provide up to 6 hours of warmth.
MOBILE PHONE CHARGING: This hand warmer can also be used as a mobile power supply to fast your electronic devices at any time, support mobile phones of various brands.
Item Type: Hand Warmer Power Bank
Material: PC, ABS, Aluminum alloy
Battery Type: lithium battery (built in)
Battery Model: 955465
Battery Capacity: 10000mAh
Temperature Range: 45C, 50C, 55C
Power: 7-10W
Hting : Electric hting wire
Input Interface: Type C
Input Current: 5V-2A
Output Current: 5V-2A
Battery Life: 6 hours
: 3
Function Introduction:
Power Bank Mode:
1. Click the button during standby charging to light up the digital display to display the current battery power. When there is no other , it will automatically turn off after about 5S.
2. When charging the mobile phone, the current battery power will be displayed, and the displayed power will decrse with time incrsed. When the charging is disconnected, the display screen will automatically turn off in about 35 seconds.
3. When charging the hand warmer, the current power will be displayed, and it will incrse with time incrsed. After the power is d, it will display 100 and be always on.
4. After low power shutdown, it will display "00" after clicking the button, and will automatically turn off in about 30s.
Hand Warmer Mode:
1. In standby or active state, press and hold the button for 3S to turn on the 1st gr, digital display will display "H1" (the default value is 45), and immediately enter the hting state and display the temperature incrsing process (there is an incrsing process NaOnly when it is lower than 45), when the temperature is up to the set value, it will enter the current temperature and current battery wheel display state.
2. Click the button again, the hand warmer will to the second gr, the digital display will display "H2" (the default value is 50), and immediately enters the hting state and displays the temperature incrsing process (the incrse process is NaOnly when it is lower than 50), when the temperature is up the set value, it will enter the current temperature and current battery wheel display status.
3. Click the button again, the hand warmer will to the third gr, the digital display will display "H3" (the default value is 55), and immediately enters the hting state and displays the temperature incrsing process (the incrse process is NaOnly when it is lower than 55), when the temperature is up the set value, it will enter the current temperature and current battery wheel display status.
4. Click the button again to cycle through the three . press the button in any gr to turn off the hand warmer function.
Working Mode :
1. When the hand warmer is in the hting mode, if the USB is inserted into the dis device, the hand warmer will be turned off and enter the mobile power mode.
2. When charging this product through the Type C data cable, it will not be able to enter the hand warmer mode, you need to unplug the charging cable, and then press the "hand warmer mode", you can enter the hand warmer mode.
Visszatérítés kézbesítés elmulasztása esetén
