SFP 1Gb BiDi 1490/1550nm LC SMF 80km Transceiver Module Compatible SFP 1Gb BiDi 1490/1550nm LC SMF 80km Transceiver Module Cisco Compatible Cisco

Transceiver module SFP 1000Base-BX 80km Compatible The  SFP BiDi Transceiver module  s designed for data transmission using ONE SINGLEMODE FIBERS and supports data rate 1Gbps, with maximum range of 80km. Operates on 1490/1550nm wavelength (TX transmitter – 1490nm laser, RX receiver – 1550nm) and has a 1xLC/UPC SIMPLEX optical connector. It is compliant with the MSA (Multi-Source Agreement). Tansceiver module SFP 1000BASE-BX 1490/1550nm LC SMF 80km DDM/DOM - Compatible   For single-fiber (BiDi) connections, the transmitter wavelength on one side must match the receiver wavelength on the other side. This means that transceivers must always be installed in pairs with complementary wavelengths. For example, an SFP 1490/1550nm module on one end must be paired with an SFP 1550/1490nm module on the other end. To make identification easier, the transceivers have different colored handles (eg, blue and green, blue and yellow, or blue and violet). LO-SF-1G-4S5-80L  (1490/1550nm) must work in pairs with LO-SF-1G-5S4-80L (1550/1490nm)   Application  LightOptics modules are a perfect match for devices such as switches, converters. Transceiver SFP Bidi modules are versatile and work reliably at distances of up to 80km. Do not use 80 km SFP modules for short-distance connections, as this may cause damage to the module. For short-reach links, please use an appropriate optical attenuator. Basic Parameters - Technical Specifications LightOptics LO-SF-1G-3S5-40L – SFP BiDi 1Gbps Tx1310nm Rx1550 nm LC SMF DDM 40km Transceiver is: Model    LO-SF-1G-3S5-40L Transceiver Type    SFP (Small Form-factor Pluggable) Standard/Protocol    1000BASE-BX Transmission Speed    1Gbps Wavelength    Tx: 1310nm, Rx: 1550nm Fiber Type    Singlemode Fiber (SMF) Connector Type    Simplex LC/UPC Distance    40 km Diagnostic Feature    DDM (Digital Diagnostic Monitoring) / DOM Standards / Compliance    MSA (Multi-Source Agreement) Operating Temperature    0 °C to +70 °C   Diagnostics of your Network  The DDM diagnostic module enables real time monitoring of the operating parameters of your transceiver, for example, the input and output optical power, temperature, voltage or current. Be in control over your network and prevent malfunctions thanks to quick and easy diagnosis of the network, with no additional equipment needed. To get access to the DDM diagnostics, both the transceiver and the device must possess the DDM function, sometimes called DOM (nearly all managed devices are equipped with this function).   Proven quality, rigorous testing   High quality and repeatability for the safe and steady operation of your network – that's our goal. The compatibility of the module is the effect not only of its programming, but also of the high standards of the production process. Our engineers adapt the transceivers to work with various networking devices, and ensure their seamless detection in switches, routers, servers or interface cards. The reliability of the transceivers is proven with thorough testing. LightOptics modules are perfect for devices such as switches, converters, routers or servers from the majority of manufacturers available on the market, thanks to our adaptability to new products and changing software.