Feature:
1. Immediate Measure and Programmable: The coating thickness gauge is used for immediate measurement results, user programmable high or low limit, visual indicator of green for pass, red for below limit, yellow for exceeded limit.
2. Dual Use for Iron or Aluminum: This thickness gauge is used to measure the thickness of the plating layer or coating on the metal face, specifically to measure the thickness of the non magnetic coating layer on the face of magnetic materials such as steel and iron (such as paint and ceramics), and also to measure the thickness of the coating layer on the face of non magnetic materials such as copper and aluminum (such as coating).
3. Two Measurement Principles: The coating thickness meter uses two principle of electromagnetic induction and eddy current effect. It can non destructively measure the thickness of non magnetic coating layer (such as paint, plastic, copper, zinc, etc.) on magnetic metal substrates (such as steel, iron and alloys) and the thickness of non conductive coating layer (oxide film, plastic, paint, etc.) on non magnetic metal substrates (such as copper, aluminum, zinc, tin, etc.).
4. High Sensitive Sensor: The thickness gauge adopts high sensitive sensors and probes to automatically identify the properties of the substrate, when the identified substrate is a magnetically conductive material (steel or iron), the thickness of the coating layer is measured using the magnetic induction principle, and the screen displays Fe, when the identified substrate is a conductive material (aluminum or copper), the thickness of the coating layer is measured using the eddy current effect, and the screen displays NF.
5. Two Modes One Key Switch: Paint thickness gauge can do single point measurement and continuous measurement mode one key switch, convenient for various measurement needs. Widely used in manufacturing, metal processing industry, chemical industry and other inspection fields, as well as laboratory, workshop and outdoor.
Specification:
Item Type: Thickness Gauge
Material: ABS, iron, aluminum
Measurement Mode: Maximum value, minimum value, average value
Data Storage: 199 groups
Alarm: LED or buzzer alarm
Auto Power Off: 5 minutes auto power offTypeFe Probe(Iron Base) NF Probe(Aluminum Or Copper And Other Non Magnetic Substrates)Principle Electromagnetic InductionEddy Current EffectMeasurement Range0 1500um0 1500um0 59.1mil0 59.1milAccuracy+ (2.5percent +1um)+ (2.5percent +1um)+ (2.5percent +0.04mil)+ (2.5percent +0.04mil)Resolution0.1um0.1umCalibrationZeroing Calibration
Multi Point Calibration(50, 100, 250, 500, 1000um)Units um, milMinimum Convex Radius of Curvature1.5mmMinimum Concave Radius of Curvature25mmMinimum Measurement Area Diameter6mmMinimum Substrate Thickness0.5mm(0.02in)0.3mm(0.012in)Battery4 x 800mAh AAA Alkaline Dry Cell Battery (Shipped With Matching Battery)
Operating Environment Temperature 20 40 celsius ( 4 104 Fahrenheit ),Humidity 20percent 90percent RH,No strong magnetic field.
Package List:
1 x Paint Thickness Gauge4 x Battery1 x Manual1 x Storage Case7 x Accessories
Note:
The meter kit is provided with five calibration plates, respectively 50um, 100um, 250um, 500um, 1000um and one piece of iron or aluminum substrate for easy calibration at any time.
Visszatérítés kézbesítés elmulasztása esetén
