―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―
🛫【Certified Store on JOOM】
A Japanese seller delivering high-quality products across borders!
📦【Shipped from Japan】
We pack carefully and deliver promptly and securely.
🔍【Strict Inspection Based on Japanese Quality Standards】
Only carefully selected products of excellent quality are delivered.
📒【Japanese Instruction Manual May Be Included】
We recommend using a text recognition app for translation.
🛍️【Some items may be based on international specifications】
Thank you for your kind understanding in advance.
👍【If you are satisfied with the product, please "Follow" our store and leave a review!】
Your support means a lot to us 💖
―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―
⚠️【Attention! Please be sure to read before purchasing】⚠️
Does this product match the conditions below?
Please check carefully before placing your order.
🔌【Voltage Compatibility】
This product is designed for use in Japan and operates on 90–110V.
Using it with a different voltage may cause malfunction or damage.
🔌【Plug Type】
The plug type is Type A or Type B, which is standard in Japan.
You may need a plug adapter for use in other countries.
💡【Important Notes on Transformers and Adapters】
🔻 A transformer adjusts the voltage to match your device's requirements.
🔻 A plug adapter only changes the plug shape and does not convert voltage.
👉 Using only a plug adapter without a transformer may damage the product.
🚫【Disclaimer】
We are not responsible for any damage or malfunction caused by
improper use without a transformer.
―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―
The first in Japan to feature a "full-circumference" ring-shaped LED light, offering optimal balance, a slim all-around head, and comfortable operation. *For domestic cordless impact drivers. As of December 2022, according to Makita research. Significantly improved visibility during work. Approximately 2.5 times brighter (compared to Makita's previous 18V model). Three levels of brightness (strong/medium/weak) can be selected. *For domestic cordless impact drivers. As of December 2022, according to Makita research. Can also be used as a work light. Can be used as a simple light in "light mode." Runs for approximately 1 hour.
New trigger switch. Intuitive trigger speed change operation from low to high speeds. Grip closer to the shaft. The gripping hand is closer to the head, making it easier to press the shaft. Reduced cam-out. Battery offset to the rear. Optimized center of gravity position allows for balanced tightening in all directions. Also reduces interference with obstacles. Rear-located operation panel makes it easy to see and use. Mode operation and remaining battery capacity can be checked while holding the switch.
The industry's smallest bit runout and double ball bearings are used. Newly designed bit sleeve. Ribs on the edge prevent damage even when the sleeve hits the material. *For domestic cordless impact drivers. Makita research as of December 2022. Tilt angle of approximately 10.5°. Excellent corner-hitting performance reduces cam-out. Comfortable for working near walls. Select the optimal mode for the task. Mode memory function. By pressing two buttons simultaneously, you can register one frequently used mode. Use the button on the handle to switch between the "mode previously used" and the "registered mode."
18V DC, slide-type Li-ion battery specification. Battery and charger sold separately. Tightening capacity: Machine screws M4-M8, standard bolts M5-M16, high-strength bolts M5-M14, coarse thread 22-125mm. Maximum tightening torque: 180N・m. RPM: Fastest 0-3,600 / Strong 0-3,200 / Medium 0-2,100 / Weak 0-1,100. RPM in Easy Mode: Wood 0-1,800 / Volts 0-3,600 / Thin wood 0-2,900 / Thick wood 0-3,600. Impacts per minute: Fastest 0-3,800 / Strong 0-3,600 / Medium 0-2,600 / Weak 0-1,100. Easy mode impacts [times/min]: Wood 0-3,800 / Bolt 0-3,800 / Thin wood board: Stops immediately after impact starts / Thick wood board: 0-2,600. Work load per charge (wood screws, lauan φ4.3 x 65mm): Approx. 960 screws
Dimensions: Length 111mm x Width 81mm x Height 234mm. Weight: 1.5kg (including battery)
